200x1000 Tiles: Wood Plank Size Guide for India

200x1000 tiles measure 200mm by 1000mm, a narrow plank format designed to replicate the look of real wooden flooring in a vitrified tile. This size is searched under several unit systems, including 8x40 tiles using rounded inches, and 0.66x3.28 tiles using rounded feet.

The narrow, elongated shape sets this size apart from square or near square formats, and is chosen specifically for a wood plank flooring look rather than as a general purpose tile. Prices range from Rs. 55 to Rs. 130 per sq.ft from Morbi and Gujarat manufacturers depending on body and wood grain finish.

200x1000 Tiles in Millimetres, Inches and Feet

200mm converts to approximately 0.66 feet or 7.87 inches, commonly rounded to 8 inches for search purposes. 1000mm converts to approximately 3.28 feet or 39.37 inches, commonly rounded to 40 inches.

This gives the commonly searched 8x40 tiles and 0.66x3.28 tiles names, both describing the same 200mm by 1000mm product using different rounding conventions. The exact manufactured size stays fixed at 200mm by 1000mm across brands, so buyers should confirm the metric size before ordering.

One 200x1000 tile covers approximately 2.15 square feet. A 100 square foot room needs roughly 47 tiles before adding wastage, a useful starting point for planning a plank tile flooring project.

200x1000 Tile Types: GVT and Full Body Vitrified

This size is available in both GVT and full body vitrified construction, unlike the largest panel sizes such as 1200x2400mm, which are manufactured exclusively in full body vitrified. The plank's small surface area means a printed glazed layer holds up well without the chipping risk a much larger panel would face.

GVT plank tiles, made using the GVT tiles process, carry a printed wood grain design under a protective glaze, giving sharp texture definition at a lower price point. Full body vitrified plank tiles carry the same wood tone through the tile thickness, which hides chips and edge wear better on high-traffic floors over time.

Both types carry water absorption below 0.5 percent under IS 15622:2006 standards for vitrified tiles, making either suitable for indoor floors and select wall applications. The choice between the two usually comes down to budget and expected foot traffic rather than performance in typical home use.

Wood Grain Tones: Oak, Walnut, Teak and Ash Look Plank Tiles

Wood grain tones are the primary design category at this size, since the narrow plank shape is specifically built to mimic real timber flooring boards. Oak look wood look tiles in light to medium brown are the most requested option, suited to living rooms and bedrooms wanting a bright, natural floor.

Walnut and teak look tones, both in deeper reddish brown shades, are popular for a warmer, more formal floor appearance in living rooms and studies. Ash look tiles, in a pale grey brown tone, suit a more contemporary interior and pair well with minimal furniture.

A matte or lightly textured finish is standard across all wood grain tones at this size, since a glossy surface reads artificial on a wood look pattern. Buyers wanting the full plank flooring effect should request samples of the exact grain repeat pattern, since some manufacturers reuse the same one or two grain prints across every tile in a box.

Laying Patterns for 200x1000 Plank Tiles

A staggered brick bond layout, where each row offsets by roughly one third of the tile length, is the standard installation pattern for 200x1000 tiles and most closely replicates how real wood plank flooring is laid. This pattern also produces the lowest cutting wastage of the common plank layouts.

A herringbone tile layout is a popular alternative for feature areas such as an entryway or a living room accent zone, using the plank's rectangular proportions to create the classic V-shaped zigzag. Herringbone at this size produces noticeably more cutting wastage than a staggered layout, so it is usually reserved for smaller feature areas rather than an entire floor.

Chevron, where the plank ends are cut at an angle to meet in a continuous point, is available at this size but is less common than herringbone due to the additional cutting precision required. A straight, non-staggered grid layout is the least recommended pattern for this size, since it removes the natural, randomised look that makes a wood plank tile convincing.

Where to Use 200x1000 Tiles: Floors, Feature Walls and Covered Decks

200x1000 tiles are most commonly used on bedroom and living room tiles floors, where the plank format creates a warm, wood floor appearance without the maintenance real timber needs in India's humid climate. Home offices and study rooms are another common application, since the wood look pairs well with a calmer, work-focused interior.

Feature walls using this size in a wood grain finish are increasingly popular behind a bed headboard or a television unit, giving a panelled, timber-clad look at a fraction of the cost and maintenance of real wood panelling. Covered balconies and verandas can use an anti-skid or GHR rated version of this size for a wood deck look, with epoxy grout at the joints recommended to resist monsoon moisture, though fully open outdoor areas need a dedicated outdoor rated tile instead.

Note: 200x1000 tiles are not recommended for small, narrow bathrooms, since the tile's own length often exceeds the width of a typical Indian bathroom, forcing awkward cuts at every row.

Installation: Lightweight Handling and Expansion Gaps

Installation at this size is considerably lighter and easier than large format panels, since a single 200x1000 tile weighs only around 4 kilograms and can be lifted and positioned by one person without assistance. This is a meaningful difference from large format sizes such as 1200x1800mm or 1200x2400mm, which need multiple installers and mechanical lifting equipment.

Plank direction matters for the final look, and installers should confirm before starting whether the planks should run the length of the room or across it, similar to planning a real wood floor installation. A small expansion gap along the room's perimeter, typically covered by a skirting or beading trim, helps prevent pressure cracking as the floor settles.

A matte finish tile version of this size needs only standard tile adhesive and grouting, without any of the reinforced anchoring or crew size considerations that apply to large panel installations. Grout colour should be chosen to closely match the wood tone, since epoxy grout in a strongly contrasting shade breaks the illusion of a continuous wood floor more than it would on a stone or marble look tile.

200x1000 Tile Pricing in India

GVT plank tiles in this size are priced from Rs. 55 to Rs. 90 per sq.ft from Morbi and Gujarat manufacturers, making this the more accessible option for a full room wood look floor. Full body vitrified plank tiles cost more, from Rs. 85 to Rs. 130 per sq.ft, reflecting the better long-term chip resistance.

Darker walnut and teak tones are sometimes priced slightly higher than lighter oak or ash tones, due to the more complex print layering needed to achieve a convincing deep wood grain. Full body vitrified tiles remain the recommended upgrade for busy family living rooms or rental properties expecting heavier daily wear.

GST, freight from Gujarat, and skirting or beading trim to match the wood tone should be budgeted separately from the per square foot tile price. Buyers should also confirm box quantities and shade lot numbers when ordering, since plank tiles with a visible grain repeat show mismatched batches more obviously than a plain colour tile would.

Sourcing, Standards and Price at a Glance

Genuine 200x1000 vitrified plank tiles carry water absorption below 0.5 percent, compliant with IS 15622:2006 standards for vitrified tiles, which keeps the wood grain surface stable through India's monsoon humidity without swelling or fading. Most 200x1000 tiles sold in India are manufactured in Morbi, Gujarat, and packed in narrower cartons designed for the plank's elongated shape.

Price for this size spans Rs. 55 to Rs. 130 per sq.ft, with GVT plank tiles at the lower end and full body vitrified options toward the upper end. Buyers outside Gujarat should confirm freight costs separately, and always request a physical sample of the grain pattern before ordering enough material for a full room.

Bringing the Wood Look Home

Choosing 200x1000 tiles is usually a decision about achieving a wood floor look without the sealing, scratching and monsoon-related upkeep real timber flooring needs in Indian homes. Confirming grain tone, layout pattern and body type before ordering helps avoid a mismatched or unconvincing result.

A plank tile floor laid in a staggered pattern with a well-matched grout colour is difficult to distinguish from real wood at a glance, while needing none of the annual maintenance timber flooring demands. TilesFinders lists 200x1000 plank tiles from Morbi and Gujarat manufacturers with body, water absorption and grain tone confirmed on every listing.